Leica PELORIS Tissue Processor


With the Leica Peloris II Tissue Processor, your laboratory can enjoy the confidence of high-quality results while addressing new workflow challenges like reduced turnaround times, lean lab processes and same day diagnosis.

The Peloris II is a rapid tissue processor that delivers high quality results for any tissue. It can be operated using xylene as well as in xylene-free mode, achieving rapid processing results using a unique ActivFlo system which generates ideal processing conditions.

Two independent retorts offer laboratories the flexibility to process tissue specimens according to workload demands.The advanced reagent management system of the Leica Peloris II Tissue Processor monitors reagent quality so that it can automatically choose the best reagent station for each processing step and also automatically indicate recommended reagent changes.

The Leica Peloris II Tissue Processor comes with a range of dedicated smart consumables adds extra value with; cassettes that eliminate biopsy pads, solid Parablocks™ wax for easy wax handling, and reagents to completely eliminate xylene.

Unit of Measureeach
Acceptable dimensions for cover glass:Slide size: 1 x 3 ” (25 x 75 mm)
Thickness: 0.9 to 1.2 mm
Dimensions of coverglass:
24 (width) x 40, 50, 55, 60 (length) mm
25 (width) x 40, 50, 55, 60 (length) mm. If 25 mm wide cover glasses are used, the system may have to be readjusted.
Floor Model28.4 X 33.7 X 59 inches (D x W x H)
Weight550 lbs (250 kg)

Processing modes – Conventional (Xylene), Xylene-free

Throughput – 450 cassettes/hour

Cassette capacity – 600 (maximum), 432 (spaced/xylene-free)

Retorts – 2 (allows for continuous processing)

Heating system – ActivFlo, non-microwave, rapid heat

Reagent stations – 16

Reagent volume – 3.8 L (1 US gal) minimum 5 L (1.32 US gal) maximum

Paraffin wax stations – 4 (each station is capable of filling one retort)

Reagent management – Concentration, cassettes, days, cycles

Operating voltage – 100 to 120 V~ 220 to 240 V~

Operating current (maximum) – 16 A (100 to 120 V~) 10 A (220 to 240 V~)

Mains frequency – 50/60 Hz

Power consumption – 1450 W (100 to 120 V~) 2150 W (220 to 240 V~)



There are no reviews yet.

Be the first to review “Leica PELORIS Tissue Processor”

Your email address will not be published. Required fields are marked *

Related products

Skip to content